This chassis was based off of Justin Hall’s fullsize Moonbuggy, originally built by Campbell Enterprise, it has since been reworked into it’s current state. The asymmetrical chassis design is designed to the result of providing just enough clearance around the driver, who sits to the left side of the chassis, and the placement of the transmission and transfer case to his right. This is an odd sight to someone who may not be familiar with the theory.

The chassis plans were again scaled around a Wraith wheelbase (13.75″) and meant to be used with a Wraith skid plate. Modifications to scale could easily be made if you wanted to downsize for smaller axles. The chassis size was designed to match the proper scale of the fullsize version, not for maximum performance on the RC level. This is still a fairly large chassis coming in at approximately 1:7 scale.

Currently these plans are in DRAFT status as I have not built my own to test and make sure the plans actually work. Once I finish my own, I’ll update the plans, number all the tubes and convert them to 8.5″ x 11″ sheets. Currently these plans must be printed on 11″x17″ sheets. If you don’t have the ability to do it I suggest going to Kinkos, Office Max, Office Depot, etc. They can print them affordably. Make sure Page Scaling is OFF (Select Print Actual Size).

I do not ask for any payment for these, I just ask that you don’t redistribute or rehost them on your own. Please direct anyone who wants to download them to this site. Thank you! If you find the templates to be useful and would like to donate, that’s great and appreciated but NOT expected.


Click here to download the templates –> Download <– MUST PRINT ON 11″ x 17″ Sheets!